Re-Coat Your Deck in 3 Easy Steps
We get it, life is busy and sometimes it’s hard to stick to the recommended recoat time for your timber deck. But don’t worry, with the right products and our advice, you can bring your deck back to life in no time. Follow the 3 easy-to-follow steps below to refresh your deck:
What you need:
How you do it:
Step 1:
Before applying the Timber Cleaner, wet the surface with water.
Step 2:
Clean all the timber surfaces thoroughly with Intergrain UltraPrep Timber Cleaner. Wait 10-15 minutes before hosing away the excess. Allow to dry completely.
Step 3:
Apply 2 coats of Intergrain UltraDeck Timber Oil, allowing at least 3 hours dry time between coats. And that’s it! Once you get started, the process is easy.
Half the battle is the motivation to start so we hope this has helped put it into gear. And if you’re timber is new, don’t forget to remove the tannin from your new timber before cleaning and coating.
Give your timber the love it deserves with the help of the team at your local Inspirations Paint store.